Journeyman Plumber Test

Find journeyman plumbing exam resources such as plumbing practice tests, plumbing test preparation guides and more. Plumbers are required to take an exam in certain states for licensure. See our sample journeyman plumbing test questions and test tips below.

 
Test Item Organization Description Cost
Journeyman Plumber Practice Exam Kit
Journeyman Plumber Practice Exam Kit
Location Type: Online

Organization: Tests.com
Address: USA
Tests.com
Created by Master Plumber, R. Dodge Woodson. 320 Question Practice Exam with Answers Explained; Exam Intro.; Test Prep and Test Taking Tips; 50 State Plumbing License Exam Guide; etc. 39.95
Plumbing Practice Test
Plumbing Practice Test
Location Type: Online

Organization: Tests.com
Address: USA
Tests.com
Take a free practice test to see how prepared you are for a plumbing certification exam. Free
C-36 PLUMBING CONTRACTORS License Exam Preparation KIT
C-36 PLUMBING CONTRACTORS License Exam Preparation KIT
Location: San Jose CA
Email: Admin@IndustrySchools.Com
Phone: (800) 456-2150

Organization: Industry Schools
Address: 2180 Laurelie Ave.San Jose USA CA 95128
Phone: 408-243-3636
Fax: 408-244-0253
Industry Schools
(800) 456-2150
Pass Your Plumbing Contractors License Exam! Complete Plumbers Licensing Exam Prep KIT with 200% Gaurantee.
Journeyman Plumber Test Prep
Journeyman Plumber Test Prep
Location: Homer AK
Phone: 907 235 6045
Location Type: Online

Organization: Wisdom & Associates, Inc
Address: Homer USA AK 99603
Phone: 907 235 6045
Wisdom & Associates, Inc
907 235 6045
Alaska Journeyman Plumber Test Prep Classes and Online Courses
Comprehensive Crash Course
Comprehensive Crash Course
Location: Somerville MA
Phone: 617 284 9444

Organization: Big Blue Plumbing and Heating
Address: Somerville USA MA 02143
Phone: 617 284 9444
Big Blue Plumbing and Heating
617 284 9444
Sixteen hour course on Massachusetts Journeyman and Master Plubmer Exams
Plumbing Exam Prep
Plumbing Exam Prep
Location: University Center MI
Phone: 989-686-9000

Organization: Delta College
Address: University Center USA MI 48710
Phone: 989-686-9000
Delta College
989-686-9000
Journeyman Plumbing License Examination Preparation - Michigan



Journeyman Plumber Exam Preparation:  Introduction by R. Dodge Woodson, Master Plumber, Author and Educator

When you sit for the Journeyman Plumbing Exam it is a huge step in your financial future.  Those of you who are testing for a journeyman license will find the world opens up to you for job opportunities. The income will be unlike anything you experienced during your apprentice period. Individuals taking an exam to earn a master plumber license are jumping to the top of the heap. If they pass, they have a world of opportunities in front of them. Of course, every master plumber has to get past the journeyman level to achieve the ultimate goal.

Apprentices seem to have it made. They can be licensed immediately. All they have to do is work under the direct supervision of a licensed plumber or attend a suitable vocational school. In some cases they do both. But any plumber in the trade knows that the money kicks in with a journeyman license.

As a journeyman plumber, you do not have to worry about piping designs and sizing. That is left to the master plumbers. The vast majority of plumbers in the business hold a journeyman license. This license allows them to work with indirect supervision. That makes a journeyman more valuable to an employer.

Journeyman Plumber Exam Test Tips

  • Try to obtain a plumbing apprenticeship.  Get as much experience as you are able to do in your state and/or attend a trade school and get your degree in the plumbing trade.
  • Get information from your state or local government about the requirements for taking the journeyman exam.
  • Use preparation study materials.
  • Take The Journeyman Plumber Practice Exam with 50 State Plumbing Exam Guide to simulate the real exam.  Exam sections include:

Administrative Policies and Procedures
General Regulations
Fixtures
Water Heaters
Water Supply and Distribution
Sanitary Drainage Systems
Indirect and Special Wastes
Vents and Venting
Traps, Clean-Outs, and Interceptors
Recycling Gray Water
Special Piping and Storage Systems

  • Study with a friend and ask each other questions using a practice test or flashcards.
  • Review the local plumbing code book.
  • Take the day off from studying the day before the exam and get plenty of sleep the night before the plumbing exam.
  • Understand what you can and cannot take with you into the test.  Some exams are open code book.
  • Arrive at the plumbing exam center early.

Journeyman Plumber Test Question Samples

1) Assume that you are installing a tub waste and overflow. It is a brass device that will be connected with slip nuts and washers. You know how to install the waste and overflow on the bathing unit in a way that it is designed to be installed. Which of the following are you also required to know?

A) A waste-and-overflow installation that is connected with slip nuts is required to be accessible.

B) All waste-and-overflow connections require access panels.

C) A waste-and-overflow assembly must be readily accessible.

D) Tub wastes and overflows are not allowed to be connected with nylon washers under the slip nuts.

2) The minimum diameter of a drain for a lavatory is ______.

A) 1.25 inches

B) 1.5 inches

C) 2 inches

D) 2.5 inches 

3) Assume that you have several jobs scheduled for next week. Some of them require the replacement of existing fixtures. In all cases the new fixtures will be installed in the same location of the fixture being replaced. Which of the following will require the issuance of a plumbing permit and a code inspection?

A) Toilet replacement

B) Shower replacement

C) Water heater replacement

D) None of the above 

 4) When is a relief vent required?

A) When a fixture will carry clear waste

B) When a trap arm's length between a fixture trap and the trap's vent exceeds the maximum allowable distance

C) When a drain has a diameter of less than two inches

D) When a drain will carry the waste of two lavatories with only one vent 

5) Gray water can be collected from _______ to be used as recycled gray water for special uses.

A) Bathtubs and showers

B) Clothes washers and laundry trays

C) Both A and B

D) None of the above 

6) When a drain-waste-and-vent (DWV) system is a new installation, and being tested, the test must be maintained for a minimum of ________ minutes.

A) 5

B) 10

C) 15

D) 30

7) An air gap is the most positive type of protection against backflow.

     True / False

8) The only fixtures allowed to be fitted with island vents are sinks and lavatories.

     True  / False

9) Assume that you are installing rough-in plumbing for an automatic clothes washer. The minimum size of the drain is required to be two inches in diameter. An indirect waste is required. It must be trapped and vented. The standpipe receptor that will receive the drainage from the washing machine must be a minimum of 18 inches tall. And, the standpipe is not allowed to be more than 36 inches tall.

      True / False

10) Sewers and water services are not allowed to be installed in a common trench.

      True / False

Answer Key:

1. A

A waste-and-overflow assembly that is connected with slip nuts and washers is required to be accessible. This is normally accomplished with the use of a removable access panel. When waste and overflows are connected with solid joints, such as solvent-weld joints, they are not required to be accessible.

2. A

Lavatories are required to have drains that have a minimum diameter of 1.25 inches.

3. C

Most fixtures can be replaced with new fixtures without the need for a permit as long as the new fixture is installed in the exact location of the fixture being replaced. And exception to this is a water heater. Any water heater replacement requires a plumbing permit and code inspection.

4. B

Relief vents are required when trap arms exceed the maximum allowable distance between a vent and the trap that it is serving.

5. C

The drainage from bathtubs, showers, lavatories, clothes washers and laundry trays can be collected to be used as recycled gray water. This recycled gray water can be used to flush toilet and urinals. It can also be used for landscape irrigation purposes.

6. C

DWV systems can be tested with air or water. The testing must be maintained for a minimum of 15 minutes without losing test pressure. Testing must include both the drainage and venting systems.

7. True

There are many types of backflow preventers. They include vacuum breakers, reduced-pressure-principal backflow preventer, and others. Air breaks are also used to prevent backflow. But, an air gap is the most positive form of backflow protection.

       8. True

      Island vents are only allowed for installation on sinks and lavatories.

       9. False

Nearly everything in the scenario above is true. However, the correct answer has to be that the statement as presented is false. The last           sentence says that the standpipe height cannot me more than 36 inches tall. This is not true. The standpipe can be up to 42 inches in height

10. False

Water services can be installed in a common trench with a sewer under certain circumstances. Normally a shelf is made along the side of the trench to house the water service. The bottom of the water service pipe must be at least 12 inches above the sewer pipe in this type of arrangement. Another option is for the two pipes to be installed at the same level in the bed of the trench. When this is the case there must be a minimum of five feet of either undisturbed or compacted dirt separating the two. The only other method is to sleeve the water service so that the sleeve extends at least five feet on each side of the sewer that a water service is crossing horizontally.

 For more practice, take our interactive Free Plumbing Practice Test.

Journeyman Plumber Practice Test Questions

Master Plumber Practice Test Sample Questions

Construction Trades Practice Tests

Plumbing Practice Test Sample Questions